Products Review Locks
Key- In- Knob Cylinder Medeco
Description:
Medeco, Key-In-Knob cylinders are designed to retrofit knob type cylindrical locksets, lever type cylindrical locksets, and bored type auxiliary deadlatches and deadlocks. 20 series, Key-in-knob cylinders are UL437 listed for drill and pick resistance.
This cylinder comes with a tail for an Arrow and Schlage knob lock.
Ilco Mortise Cylinder
Mortise Cylinders
Mortise Cylinders are machined from solid brass bar stock. The broad selection of available models provides the flexibility for numerous applications.
In addition to the standard finishes offered, Mortise Cylinders are available in Ilco Premier Finishes (32D Satin Stainless Steel and 03P Permanent Polished Bright Brass over stainless steel). These finishes are the perfect solution for keeping that "like new" finish for years.
Ilco Rim Cylinder
Rim Cylinders
The line of Rim Cylinders is ideal for use on a 1 3/8" (35mm) to 2 ¼" (57mm) door thicknesses. Each Rim Cylinder is machined from solid brass bar stock and is furnished with trim ring, mounting plate and break-off screws.
In addition to the standard finishes offered, Rim Cylinders are available in Ilco Premier Finishes (32D Satin Stainless Steel and 03P Permanent Polished Bright Brass over stainless steel). These finishes are the perfect solution for keeping that "like new" finish for years.
MUL-T-LOCK Rim Cylinder
Description:
High security replacement rim cylinders for most metal door locking mechanisms. High quality solid brass plug and body and steel tail.
High precision 10 telescopic pin tumbler system. Patented ribbed plug and combined driver pins. The patented keys will only be cut on presentation of the Key Holder Registration Card and verification of the signature thereon.
MUL-T-LOCK Mortise Cylinder
Description:
High security replacement threaded mortise cylinders for most metal door locking mechanisms.High precision 10 telescopic pin tumbler system. Patented ribbed plug and combined driver pins. Patented "Interactive mechanism". The patented Interactive keys will only be cut on presentation of the Key Holder Registration Card and verification of the signature thereon.
Adams Rite Electric Strike
Description:
Electrical control of any door equipped with "key-in-lever/cylindrical" type latchsets listed above. Electrical actuation unlocks strike jaw, releasing latchbolt, so door can be opened without operating latch itself. Extremely compact mechanism fits into jamb sections as shallow as 1-1/16".
This non-handed strike features an ultra-compact design and an adjustable stainless steel split-jaw with over 2400lbs. of holding force. The strike releases electrically with up to 35lbs. of door "preload" (pressure exerted on doors by air conditioning systems, warping or misaligned hardware which can disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt AC/DC power. Strikes are equipped with a quick connect plug-in type connector.
Faceplate: 1 1/4 x 4 7/8
Case: 1" x 3-3/8" x 1-1/16" deep.
Strike Opening: 5/8" Adjustable x 1-7/16" x 1/2" deep.
Bolt retainer jaw is stainless steel.
Fail Safe / Fail Secure: Field selectable at time of installation.
Adams Rite Deadlatch Lock
Description:
For hollow metal or wood doors prepared for hardware according to the specifications of the American National Standards Institute, the 4920AN Deadlatches provide precise traffic control.
A key-controlled bolt hold-back feature allows a door to be free-swinging part of the day and exit-only when the bolt is free to latch. This allows a “locked” entrance to be used as an exit by customers or visitors already in the building. Interchangeable, without door modification, with any MS1850SN Deadbolt of same faceplate shape and backset.Replaces 4520 and 4720 ANSI Deadlatches.
1-3/4" minimum door thickness required.
5/8 x 1 x 5/8 throw.
Solid brass.
Handing is easily reversible using only a screwdriver.
1-1/2" or 2-3/4" only.
Turn key or operate handle to retract spring-loaded latch bolt. To hold bolt retracted, push it in and secure by reverse turn of key. Uses any standard mortise cylinder with MS cam.
Adamas Rite Deadbolt Lock
Description:
For hollow metal or wood doors prepared for hardware according to the specifications of the American National Standards Institute, this MS deadbolt provides maximum security and ease of installation. Its standard 1-1/2" backset dimension provides adequate clearance for the deep stop on the door jamb of hollow metal entrances.
360 turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder from either or both sides. Cylinder must have MS cam. Mortise thubturn can be used too.
Bolt: 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight ply laminated stainless steel. Center ply has Alumina-Ceramic core to defeat any hacksaw attack, including rod-type "super" hacksaws.
Case: Steel with corrosion-resistant plating. 1" x 6" x 2-1/4".
Backset: 1 1/2" only
Cylinders and thumb turn not included.
When using a cylinder on one side and a thumb turn on the other side, you should use the 1 inch.
Ilco Unican - Simplex 1000 Series Lever Lock
UNICAN 1000 Series locksets are the best choice for limiting access to high-traffic, security-sensitive areas in commercial, institutional, and industrial buildings.
Ideal for locations with a high personnel turnover rate, such as data processing centers, employee entrances, hospitals and R&D labs.
Passage feature allows access without using the entry code (keeps the door unlocked, even while closed). This function is on the inside of the door and can be thumb turn or key activated.
Entry/egress locksets UNICAN EE1000 Series, provide the same pushbutton access control as the 1000 Series, but on both sides of the door. Each side accepts an independent code. The perfect solution for airports (between departure lounge and jetway), police station holding rooms, or any situation where two-way door security is required.
UNICAN L1000 Series locksets combine the features of the 1000 Series with lever handle to provide accessibility for the disabled. All L1000 Series locks comply with ADA (American with Disabilities Act) standards.
Ideal for high-frequency use in hospitals, entrances to commercial or industrial buildings, apartments, condominiums, washrooms, dormitories, and schools.
Key Override option allows a facility to maintain or initiate a master keyed security system.
Unican-Simplex Pushbutton Lock
No Keys to Lose
Just press the correct code to gain access--no keys to carry, lend or lose.
Specifications: Thousands of possible combinations make guessing the code virtually impossible. Change the code as often as you want in just minutes, without removing the lock from the door. Heavy-duty cylindrical lock housing conforms to ANSI 156.2 Grade 1 and Department of Defense 5220.22M. Latch/backset: UL/ULC three-hour rated 5/8" (16mm) latch bolt with 2-3/4" (70mm) backset and floating faceplate. Door thickness: 1-3/8-2-1/4" (35-57mm). Key Override locks let you maintain a keyed-alike security system with the same key system already in use. Key is normally only in the hands of security or management and will override the lock's combination to gain entry. Key override will accept most Best and compatible removable-core cylinders. Removable-core cylinder is not supplied with lock.Passage locks allow access without using entry code (keep door unlocked even while closed). Function is on inside of door and can be activated by a thumbturn or a key (thumbturn and key included on all passage-feature models). Latch and hand on Knob-style locks are field-reversible. Furnished with standard and reversible strike plates. Satin chrome finish
Simplex Keyless Lock 900 Series
Keyless Security
SIMPLEX 900 series auxiliary pushbutton locks from ILCO UNICAN are designed for easy installation in addition to, or as replacement for existing locks. Deadbolt, and Spring latch models available. Simplex 900 series are fully mechanical - not affected by power failures. Mechanical pushbutton access controls provide a high level of security and eliminate the key control problems associated with the traditional metal key. These locks accept a private code (up to 5 digits pressed individually or in unison). You set your own code when the lock is installed. Simply press in the correct code to gain access. No keys to carry, lose or replace.
Give the code only to the people who need access. Change the code yourself as often as needed in seconds without removing the lock from the door. This simple code change procedure eliminates the cost of rekeying doors due to lost, stolen or misplaced keys.
Medeco Tubular Dead Bolt Single Cylinder Brass
This product is designed to accommodate both mortise and drive-in applications, which provide greater flexibility and easy installation. It has a Solid brass collar that spins under pressure to prevent wrench attacks. The Large thumb turn feature of this product that accommodates physically challenged individuals to use this product with ease. The high security strike plate has a special box design with 2 1/2 screws that anchor the strike directly to the building structure behind the frame that challenges potential intruders.
Mul-T-Lock Top Guard Plate with Cylinder Top Lock
MUL-T-LOCK's Top Guard Plate with Cylinder is a reinforced hardened steel face, concealed by a decorative cover plate that protects the MUL-T-LOCK Rim Cylinder. This product takes cylinder security to the next level by its designed to uphold to the most determined attempts of physical attack. This product greatly enhances the security of Segal lock and many other brands of rim type locks like jimmy proof deadbolts, deadlocks, drop bolts and slam locks. This product is made of thick steel and mounting bolts that resist wrenching, prying, and drilling and hammer attacks. The Mul-T-Lock Top Guard Plate is a Hardened steel plug protector to enhance and resists cylinder drilling attacks. It also has the option of removable decorative cover plates that enhances appearance and can easily be replaced if it becomes damaged. The cylinder portion of this product is a UL437 Drill and Pick Resistance and has the MUL-T-LOCK's Patented Interactive Key Control System
Mul-T-Lock Hercular Deadbolt Heavy Duty Double Cylinder
The Mul-T-Lock Hercular Deadbolt Double Cylinder is reinforced in just about every way possible. The Hercular Deadbolt will stop almost any attempt at forced entry. The general rule is that strength usually does not mix with flexibility, not in the case of the Mul-T-Lock Hercular Deadbolt Double Cylinder. This is the only Grade 1 Deadlock with an adjustable backset. This product is a UL fire rated latch with a UL437 drill and picks resistance. It also comes with a bump proof high security locks cylinder and a key control system. This product also features adjustable backsets from a 2-3/8” to 2- 3/4 “and it is HD 236G key. The difference between this product and the Mul-T-Lock Hercular Deadbolt Single Cylinder, is that there are two cylinders placed on the door. One of the cylinders is place on the entrance side of the door and the other is placed on the exit side of the door.
Mul-T-Lock Hercular Deadbolt Single Cylinder
The Mul-T-Lock Hercular Deadbolt Single Cylinder is reinforced in just about every way possible. The Hercular Deadbolt will stop almost any attempt at forced entry. The general rule is that strength usually does not mix with flexibility, not in the case of the Mul-T-Lock Hercular Deadbolt Single Cylinder. This is the only Grade 1 Deadlock with an adjustable backset. This product is a UL fire rated latch with a UL437 drill and picks resistance. It also comes with a bump proof high security locks cylinder and a key control system. This product also features adjustable backsets from a 2-3/8” to 2- 3/4 “and it is HD 236G key. The difference between this product and the Mul-T-Lock Hercular Deadbolt Double Cylinder is that the cylinder is placed on the entrance side of the door and a thumb turn on the exit side of the door.
Mul-T-Lock Lockset Lever (Clutch) Entrance
 Entrance 2 34 - bottom lock..jpg)
This product is designed to provide superior door protection with uncompromised key control that is fitted with a MUL-T-LOCK Key. This product is an ADA (America Disabilities Act) 2 3/4" bottom lock compliant Lever Design. It also comes in a Knob (Ball or Plym) Design that will accommodate just about any need. It features an ANSI Grade 2 (Clutch Design) Locking Mechanism and it is an ADA (America Disabilities Act) Compliant. It also features a UL Fire Rated Latch with a Drill and Pick Resistant Cylinder. The product also includes a MUL-T-LOCK's Patented Interactive Key Control System with a 264G Keyway.
Mul-T-Lock, Mortise Lock 1453XF
Mortise locks are the most common bottom locks that are found on New York’s apartment doors. The MUL-T-LOCK manufacture provides a Heavy duty entrance lock that comes in a wide variety of residential Mortise Locks with two options. The 1453XF model provides a through-bolted or surface mounted trim that comes in a 2½” back set.These locks are fitted with a High Security MUL-T-LOCK Mortise Cylinder. It features a Bump Proof High Security Lock Cylinder with a UL437 Drill and Pick Resistance. It has a 264G key way with Key Control System.
Mul-T-Lock , Mortise Lock 1753XF
Mortise locks are the most common bottom locks that are found on New York’s apartment doors. The MUL-T-LOCK manufacture provides a Heavy duty entrance lock that comes in a wide variety of residential Mortise Locks with two options. The 1753XF model provides a through-bolted or surface mounted trim that comes in a 2¾" backset. These locks are fitted with a High Security MUL-T-LOCK Mortise Cylinder. It features a Bump Proof High Security Lock Cylinder with a UL437 Drill and Pick Resistance. It has a 264G key way with Key Control System.
USCAN Levers
.jpg)
This product is approved by the ADA with a Clutched design medium duty. This product accommodates Entry, Storeroom, Passage and Classroom doors. It has a removable outer thru-bolting with the feature of adjustable door thickness 1-3/8" to 1-3/4". This product also features interior Push and Turn button, SC1 keyway and accepts most aftermarket cylinders.
USCAN Double Cylinder Tubular Dead Bolt
This product is a Medium security double cylinder deadbolt lockset. It has a 4-Way Adjustable 2-3/8", 2-3/4" backset with removable face for drive-in or standard. This Product fits 1-3/8” to 1-3/4" door thickness and includes a 1" throw dead-bolt latch. This product accepts most manufacturers’ aftermarket cylinders and it’s designed to install with ease.
Mul-T-Lock Dead Lock Jimmy Proof
The MUL-T-LOCK's Jimmy Proof Lock gives the Customer a flexible surface mounted deadlock protection. This deadlock can be supplied either in Single Cylinder configuration with a Thumb turn on the inside or in Double Cylinder Configuration.
USCAN Storeroom Key in Knob Lock Set 900-511
This product is a Heavy duty cylindrical "Clutched" Grade 1 lever set that’s designed to install with ease for a storeroom. It comes with a removable outer thru-bolting and adjustable door thickness feature. It also features an interior push and turn button. Accepts most manufacturers’ aftermarket cylinders and has a SC1 keyway. Its Keyed Different with a 2-3/4” UL listed latch bolt and a ANSI strike.
USCAN Entry Key in Knob Lock Set 900-500
This product is a Heavy duty cylindrical "Clutched" Grade 1 lever set that’s designed to install with ease. It comes with a removable outer thru-bolting and adjustable door thickness feature. It also features an interior push and turn button. Accepts most manufacturers’ aftermarket cylinders and has a SC1 keyway. Its Keyed Different with a 2-3/4” UL listed latch bolt and a ANSI strike.
Ilco Rim Cylinder 7015
Find a local plumber.
